SDVC22-S (5A）
SDVC22-S（5A）Variable Voltage Digital Controller for Vibratory Feeder
The category：Variable Voltage Digital Controller
Profile information：Automatic Voltage Regulation，Time Adjustable Soft Start，Preset Speeds，Dual Switch Sensor ON/OFF Control，Photoelectric Sensor ON/OFF Control，Remote，Speed Control，DC Control Output，Overheat Protection，Overcurrent Protection，Overvoltage Protection，Fuse-Short Circuit Protection，Max Adjustable Output Voltage
| No. | Item | Range | Unit | Description | ||
| Min | Typical | Max | ||||
| 1 | Input Voltage | 85 | 220 | 260 | V | AC RMS |
| 2 | Adjustable Output Voltage Range | 35 | – | Vin-10 | V | Half Wave |
| 45 | – | Vin-5 | V | Full Wave | ||
| 3 | Voltage Adjustment Accuracy | 1 | V | |||
| 4 | Response Time of Voltage Regulation | 0 | 0.01 | 0.02 | s | |
| 5 | Adjustable Output Current Range | 0 | – | 5 | A | Two Sides Combined Together |
| 6 | Output Power | 0 | – | 1100 | VA | Two Sides Combined Together |
| 7 | Output Frequency | 45 | 50/60 | 65 | Hz | Half Wave |
| 90 | 100/120 | 130 | Hz | Full Wave | ||
| 8 | Output Waveform | Phase cut sine | ||||
| 9 | Soft Start Time | 0 | 0.5 | 9.9 | s | |
| 10 | On/Off Delay Time Range | 0 | 0.2 | 9.9 | s | |
| 11 | On/Off Delay Time Accuracy | 0.1 | s | |||
| 12 | Overheat Protection Trigger Temperature | 58 | 60 | 66 | 0C | |
| 13 | DC Control Output Voltage | 22 | 24 | 26 | V | |
| 14 | DC Control Output Current | 0 | – | 200 | mA | |
| 15 | Analog Control Signal | 1-5 | V | Remote Speed Control Voltage | ||
| 16 | Digital Control Signal | 24 | V | Switching Signal | ||
| 17 | Adjustment Method | 8 | Button | |||
| 18 | Fuse Capacity | 6.3 | A | |||
| 19 | Standby Power Comsumption | – | 3 | – | W | |
| 20 | Display Method | 8 | Digit | LED Digital Tubes | ||
| 21 | Ambient Temperature | 0 | 25 | 40 | 0C | No Condenstation |
| 22 | Ambient Humidity | 10 | 60 | 85 | % | |
